WALL MOUNTING

Side Light

multi frame – Side Light

Multi frame side light LED light boxes can be used single or double sided, free standing, wall mounted or suspended The LED light boxes work with side illumination – LED modules and the drivers are built in the frame on two opposite profiles. The biggest distance which can be lit in this way evenly is 300 cm / 118”. Therefore 300 cm / 118” high or long light boxes can be built. Theoretically the length / height is endless.

profile depths

Three different profile dimensions (depth) are used to build different frame sizes  – 80, 120 and 160 mm / 3.2”, 4.7” and 6.3” are available.

wall fixtures

The wall connectors are mounted to the profile and fixed to the wall. After the fabric panel is attached the wall connectors cannot be seen anymore.

plug & play

Frames can be delivered in parts. This safes transport costs and packing material. Assemble the frame, connect driver and cables – plug it in and finished.

Super Slim

multi frame Super Slim

Multi frame super slim frames 35 and 65 are LED frames with a frame depth of only 35 or 65 mm / 1.4” or 2.6”. The frames are perfectly designed for wall mounting. These frames are built to last, using high quality materials and manufacturing to ensure a durable and long lasting display frame.

The special dimension of the lens of the LED module prevents hotspots and achieves an even, bright light across the display with no shadows.

profile depths

Two different profile dimensions (depth) are used to build different frame sizes – 35 and 65 mm / 1.4” and 2.6” are available.

cables

Our LED modules come with a special cable system which can be hidden in the slots of the aluminium profile in the frame. Therefore we achieve even lighting without any shadows.

plug & play

Frames up to a size of two square meters come pre-assembled (depending on length X width of the frame). Just connect frame, driver & cables – plug it in and finished.

Backload

multi frame Backload

Multi frame backload LED light boxes can be used single or double sided. For stability reasons backload is often used with large formats. The special design of the profile allows that you can change graphics from one side. You open the back side/take off the print and then you are able to take out the front print/picture from behind.

profile depth

A profile – profile dimension (depth) 160 mm / 6.3” is used for this display frame.

wall mounting

Because of the stability of the backload profile support profiles are not neccessary.

plug & play

Frames can be delivered in parts. This safes transport costs and packing material. Assemble the frame, connect driver and cables – plug it in and finished.

Multi Tower

Multi Tower

Multi tower 3D allows you to cover columns all around. It therefore creates an impressive advertising area which gets even more impressive when it is LED backlit.

profile design – outside corner

The advantage compared to similar products is the 90° profile slot. The fabric is pushed 3 mm into the slot and only then tensioned around the corner. This technique helps to preserve the fabric as it prevents it from overstretching.

RAL colours

Different colours are possible upon request (powder coating).